It works, sort of, amazingly

src/yggdrasil/conn.go

@@ -15,7 +15,6 @@ type Conn struct {
 	core          *Core
 	nodeID        *crypto.NodeID
 	nodeMask      *crypto.NodeID
-	recv          chan *wire_trafficPacket // Eventually gets attached to session.recv
 	mutex         *sync.RWMutex
 	session       *sessionInfo
 	readDeadline  atomic.Value // time.Time // TODO timer
@@ -33,10 +32,11 @@ func (c *Conn) startSearch() {
 	// The searchCompleted callback is given to the search
 	searchCompleted := func(sinfo *sessionInfo, err error) {
 		// Make sure that any blocks on read/write operations are lifted
-		defer close(c.searchwait)
+		defer func() {
-		// Update the connection with the fact that the search completed, which
-		// allows another search to be triggered if necessary
 			c.searching.Store(false)
+			close(c.searchwait)
+			c.searchwait = make(chan interface{})
+		}()
 		// If the search failed for some reason, e.g. it hit a dead end or timed
 		// out, then do nothing
 		if err != nil {
@@ -64,8 +64,6 @@ func (c *Conn) startSearch() {
 	}
 	// doSearch will be called below in response to one or more conditions
 	doSearch := func() {
-		// Store the fact that we're searching, so that we don't start additional
-		// searches until this one has completed
 		c.searching.Store(true)
 		// Check to see if there is a search already matching the destination
 		sinfo, isIn := c.core.searches.searches[*c.nodeID]
@@ -73,8 +71,6 @@ func (c *Conn) startSearch() {
 			// Nothing was found, so create a new search
 			sinfo = c.core.searches.newIterSearch(c.nodeID, c.nodeMask, searchCompleted)
 			c.core.log.Debugf("%s DHT search started: %p", c.String(), sinfo)
-			// Allow writes/reads to block until the search is complete
-			c.searchwait = make(chan interface{})
 		}
 		// Continue the search
 		c.core.searches.continueSearch(sinfo)
@@ -111,23 +107,23 @@ func (c *Conn) Read(b []byte) (int, error) {
 	sinfo := c.session
 	c.mutex.RUnlock()
 	// If there is a search in progress then wait for the result
-	if searching, ok := c.searching.Load().(bool); ok && searching {
+	if sinfo == nil {
+		// Wait for the search to complete
 		<-c.searchwait
+		// Retrieve our session info again
+		c.mutex.RLock()
+		sinfo = c.session
+		c.mutex.RUnlock()
+		// If sinfo is still nil at this point then the search failed and the
+		// searchwait channel has been recreated, so might as well give up and
+		// return an error code
+		if sinfo == nil {
+			return 0, errors.New("search failed")
 		}
-	// If the session is not initialised, do nothing. Currently in this instance
-	// in a write, we would trigger a new session, but it doesn't make sense for
-	// us to block forever here if the session will not reopen.
-	// TODO: should this return an error or just a zero-length buffer?
-	if sinfo == nil || !sinfo.init {
-		time.Sleep(time.Second)
-		return 0, errors.New("session is closed")
 	}
 	// Wait for some traffic to come through from the session
-	fmt.Println(c.String(), "Start select")
 	select {
-	// TODO...
+	case p, ok := <-sinfo.recv:
-	case p, ok := <-c.recv:
-		fmt.Println(c.String(), "Finish select")
 		// If the session is closed then do nothing
 		if !ok {
 			return 0, errors.New("session is closed")
@@ -168,10 +164,6 @@ func (c *Conn) Read(b []byte) (int, error) {
 		// If we've reached this point then everything went to plan, return the
 		// number of bytes we populated back into the given slice
 		return len(b), nil
-		//case <-c.recvTimeout:
-		//case <-c.session.closed:
-		//	c.expired = true
-		//	return len(b), errors.New("session is closed")
 	}
 }
 
@@ -179,12 +171,9 @@ func (c *Conn) Write(b []byte) (bytesWritten int, err error) {
 	c.mutex.RLock()
 	sinfo := c.session
 	c.mutex.RUnlock()
-	// If there is a search in progress then wait for the result
-	if searching, ok := c.searching.Load().(bool); ok && searching {
-		<-c.searchwait
-	}
 	// If the session doesn't exist, or isn't initialised (which probably means
-	// that the search didn't complete successfully) then try to search again
+	// that the search didn't complete successfully) then we may need to wait for
+	// the search to complete or start the search again
 	if sinfo == nil || !sinfo.init {
 		// Is a search already taking place?
 		if searching, sok := c.searching.Load().(bool); !sok || (sok && !searching) {
@@ -192,13 +181,19 @@ func (c *Conn) Write(b []byte) (bytesWritten int, err error) {
 			c.core.router.doAdmin(func() {
 				c.startSearch()
 			})
-			//return 0, errors.New("starting search")
 		}
+		// Wait for the search to complete
 		<-c.searchwait
-		if sinfo == nil || !sinfo.init {
+		// Retrieve our session info again
-			return 0, errors.New("search was failed")
+		c.mutex.RLock()
+		sinfo = c.session
+		c.mutex.RUnlock()
+		// If sinfo is still nil at this point then the search failed and the
+		// searchwait channel has been recreated, so might as well give up and
+		// return an error code
+		if sinfo == nil {
+			return 0, errors.New("search failed")
 		}
-		//return 0, errors.New("waiting for search to complete")
 	}
 	// defer util.PutBytes(b)
 	var packet []byte

src/yggdrasil/dialer.go

@@ -63,7 +63,7 @@ func (d *Dialer) DialByNodeIDandMask(nodeID, nodeMask *crypto.NodeID) (Conn, err
 		mutex:      &sync.RWMutex{},
 		nodeID:     nodeID,
 		nodeMask:   nodeMask,
-		recv:     make(chan *wire_trafficPacket, 32),
+		searchwait: make(chan interface{}),
 	}
 	return conn, nil
 }

src/yggdrasil/session.go

@@ -463,7 +463,7 @@ func (ss *sessions) handlePing(ping *sessionPing) {
 				mutex:      &sync.RWMutex{},
 				nodeID:     crypto.GetNodeID(&sinfo.theirPermPub),
 				nodeMask:   &crypto.NodeID{},
-				recv:     sinfo.recv,
+				searchwait: make(chan interface{}),
 			}
 			for i := range conn.nodeMask {
 				conn.nodeMask[i] = 0xFF