changed Yggdrasil to RiV-mesh

added webview GUI

src/address/address.go

@@ -1,4 +1,4 @@
-// Package address contains the types used by yggdrasil to represent IPv6 addresses or prefixes, as well as functions for working with these types.
+// Package address contains the types used by mesh to represent IPv6 addresses or prefixes, as well as functions for working with these types.
 // Of particular importance are the functions used to derive addresses or subnets from a NodeID, or to get the NodeID and bitmask of the bits visible from an address, which is needed for DHT searches.
 package address
 
@@ -6,18 +6,18 @@ import (
 	"crypto/ed25519"
 )
 
-// Address represents an IPv6 address in the yggdrasil address range.
+// Address represents an IPv6 address in the mesh address range.
 type Address [16]byte
 
-// Subnet represents an IPv6 /64 subnet in the yggdrasil subnet range.
+// Subnet represents an IPv6 /64 subnet in the mesh subnet range.
 type Subnet [8]byte
 
-// GetPrefix returns the address prefix used by yggdrasil.
+// GetPrefix returns the address prefix used by mesh.
 // The current implementation requires this to be a multiple of 8 bits + 7 bits.
 // The 8th bit of the last byte is used to signal nodes (0) or /64 prefixes (1).
 // Nodes that configure this differently will be unable to communicate with each other using IP packets, though routing and the DHT machinery *should* still work.
 func GetPrefix() [1]byte {
-	return [...]byte{0x02}
+	return [...]byte{0xfc}
 }
 
 // IsValid returns true if an address falls within the range used by nodes in the network.

src/admin/admin.go

@@ -13,8 +13,8 @@ import (
 
 	"github.com/gologme/log"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/config"
-	"github.com/yggdrasil-network/yggdrasil-go/src/core"
+	"github.com/RiV-chain/RiV-mesh/src/config"
+	"github.com/RiV-chain/RiV-mesh/src/core"
 )
 
 // TODO: Add authentication

src/admin/getdht.go

@@ -4,7 +4,7 @@ import (
 	"encoding/hex"
 	"net"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/address"
 )
 
 type GetDHTRequest struct{}

src/admin/getpaths.go

@@ -4,7 +4,7 @@ import (
 	"encoding/hex"
 	"net"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/address"
 )
 
 type GetPathsRequest struct {

src/admin/getpeers.go

@@ -4,7 +4,7 @@ import (
 	"encoding/hex"
 	"net"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/address"
 )
 
 type GetPeersRequest struct {

src/admin/getself.go

@@ -3,7 +3,7 @@ package admin
 import (
 	"encoding/hex"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/version"
+	"github.com/RiV-chain/RiV-mesh/src/version"
 )
 
 type GetSelfRequest struct{}

src/admin/getsessions.go

@@ -4,7 +4,7 @@ import (
 	"encoding/hex"
 	"net"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/address"
 )
 
 type GetSessionsRequest struct{}

src/config/config.go

@@ -1,6 +1,6 @@
 /*
 The config package contains structures related to the configuration of an
-Yggdrasil node.
+Mesh node.
 
 The configuration contains, amongst other things, encryption keys which are used
 to derive a node's identity, information about peerings and node information
@@ -11,7 +11,7 @@ In order for a node to maintain the same identity across restarts, you should
 persist the configuration onto the filesystem or into some configuration storage
 so that the encryption keys (and therefore the node ID) do not change.
 
-Note that Yggdrasil will automatically populate sane defaults for any
+Note that Mesh will automatically populate sane defaults for any
 configuration option that is not provided.
 */
 package config
@@ -23,21 +23,21 @@ import (
 )
 
 // NodeConfig is the main configuration structure, containing configuration
-// options that are necessary for an Yggdrasil node to run. You will need to
-// supply one of these structs to the Yggdrasil core when starting a node.
+// options that are necessary for an Mesh node to run. You will need to
+// supply one of these structs to the Mesh core when starting a node.
 type NodeConfig struct {
 	sync.RWMutex        `json:"-"`
 	Peers               []string                   `comment:"List of connection strings for outbound peer connections in URI format,\ne.g. tls://a.b.c.d:e or socks://a.b.c.d:e/f.g.h.i:j. These connections\nwill obey the operating system routing table, therefore you should\nuse this section when you may connect via different interfaces."`
 	InterfacePeers      map[string][]string        `comment:"List of connection strings for outbound peer connections in URI format,\narranged by source interface, e.g. { \"eth0\": [ tls://a.b.c.d:e ] }.\nNote that SOCKS peerings will NOT be affected by this option and should\ngo in the \"Peers\" section instead."`
 	Listen              []string                   `comment:"Listen addresses for incoming connections. You will need to add\nlisteners in order to accept incoming peerings from non-local nodes.\nMulticast peer discovery will work regardless of any listeners set\nhere. Each listener should be specified in URI format as above, e.g.\ntls://0.0.0.0:0 or tls://[::]:0 to listen on all interfaces."`
-	AdminListen         string                     `comment:"Listen address for admin connections. Default is to listen for local\nconnections either on TCP/9001 or a UNIX socket depending on your\nplatform. Use this value for yggdrasilctl -endpoint=X. To disable\nthe admin socket, use the value \"none\" instead."`
+	AdminListen         string                     `comment:"Listen address for admin connections. Default is to listen for local\nconnections either on TCP/9001 or a UNIX socket depending on your\nplatform. Use this value for meshctl -endpoint=X. To disable\nthe admin socket, use the value \"none\" instead."`
 	MulticastInterfaces []MulticastInterfaceConfig `comment:"Configuration for which interfaces multicast peer discovery should be\nenabled on. Each entry in the list should be a json object which may\ncontain Regex, Beacon, Listen, and Port. Regex is a regular expression\nwhich is matched against an interface name, and interfaces use the\nfirst configuration that they match gainst. Beacon configures whether\nor not the node should send link-local multicast beacons to advertise\ntheir presence, while listening for incoming connections on Port.\nListen controls whether or not the node listens for multicast beacons\nand opens outgoing connections."`
 	AllowedPublicKeys   []string                   `comment:"List of peer public keys to allow incoming peering connections\nfrom. If left empty/undefined then all connections will be allowed\nby default. This does not affect outgoing peerings, nor does it\naffect link-local peers discovered via multicast."`
 	PublicKey           string                     `comment:"Your public key. Your peers may ask you for this to put\ninto their AllowedPublicKeys configuration."`
 	PrivateKey          string                     `comment:"Your private key. DO NOT share this with anyone!"`
 	IfName              string                     `comment:"Local network interface name for TUN adapter, or \"auto\" to select\nan interface automatically, or \"none\" to run without TUN."`
 	IfMTU               uint64                     `comment:"Maximum Transmission Unit (MTU) size for your local TUN interface.\nDefault is the largest supported size for your platform. The lowest\npossible value is 1280."`
-	NodeInfoPrivacy     bool                       `comment:"By default, nodeinfo contains some defaults including the platform,\narchitecture and Yggdrasil version. These can help when surveying\nthe network and diagnosing network routing problems. Enabling\nnodeinfo privacy prevents this, so that only items specified in\n\"NodeInfo\" are sent back if specified."`
+	NodeInfoPrivacy     bool                       `comment:"By default, nodeinfo contains some defaults including the platform,\narchitecture and Mesh version. These can help when surveying\nthe network and diagnosing network routing problems. Enabling\nnodeinfo privacy prevents this, so that only items specified in\n\"NodeInfo\" are sent back if specified."`
 	NodeInfo            map[string]interface{}     `comment:"Optional node info. This must be a { \"key\": \"value\", ... } map\nor set as null. This is entirely optional but, if set, is visible\nto the whole network on request."`
 }
 

src/core/api.go

@@ -12,8 +12,8 @@ import (
 	//"time"
 
 	"github.com/gologme/log"
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	//"github.com/yggdrasil-network/yggdrasil-go/src/crypto"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	//"github.com/RiV-chain/RiV-mesh/src/crypto"
 	//"github.com/Arceliar/phony"
 )
 
@@ -122,7 +122,7 @@ func (c *Core) Listen(u *url.URL, sintf string) (*TcpListener, error) {
 	return c.links.tcp.listenURL(u, sintf)
 }
 
-// Address gets the IPv6 address of the Yggdrasil node. This is always a /128
+// Address gets the IPv6 address of the Mesh node. This is always a /128
 // address. The IPv6 address is only relevant when the node is operating as an
 // IP router and often is meaningless when embedded into an application, unless
 // that application also implements either VPN functionality or deals with IP
@@ -132,7 +132,7 @@ func (c *Core) Address() net.IP {
 	return addr
 }
 
-// Subnet gets the routed IPv6 subnet of the Yggdrasil node. This is always a
+// Subnet gets the routed IPv6 subnet of the Mesh node. This is always a
 // /64 subnet. The IPv6 subnet is only relevant when the node is operating as an
 // IP router and often is meaningless when embedded into an application, unless
 // that application also implements either VPN functionality or deals with IP
@@ -143,7 +143,7 @@ func (c *Core) Subnet() net.IPNet {
 	return net.IPNet{IP: subnet, Mask: net.CIDRMask(64, 128)}
 }
 
-// SetLogger sets the output logger of the Yggdrasil node after startup. This
+// SetLogger sets the output logger of the Mesh node after startup. This
 // may be useful if you want to redirect the output later. Note that this
 // expects a Logger from the github.com/gologme/log package and not from Go's
 // built-in log package.

src/core/core.go

@@ -16,13 +16,13 @@ import (
 	"github.com/Arceliar/phony"
 	"github.com/gologme/log"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/config"
-	//"github.com/yggdrasil-network/yggdrasil-go/src/crypto"
-	"github.com/yggdrasil-network/yggdrasil-go/src/version"
+	"github.com/RiV-chain/RiV-mesh/src/config"
+	//"github.com/RiV-chain/RiV-mesh/src/crypto"
+	"github.com/RiV-chain/RiV-mesh/src/version"
 )
 
-// The Core object represents the Yggdrasil node. You should create a Core
-// object for each Yggdrasil node you plan to run.
+// The Core object represents the Mesh node. You should create a Core
+// object for each Mesh node you plan to run.
 type Core struct {
 	// This is the main data structure that holds everything else for a node
 	// We're going to keep our own copy of the provided config - that way we can
@@ -116,7 +116,7 @@ func (c *Core) _addPeerLoop() {
 	})
 }
 
-// Start starts up Yggdrasil using the provided config.NodeConfig, and outputs
+// Start starts up Mesh using the provided config.NodeConfig, and outputs
 // debug logging through the provided log.Logger. The started stack will include
 // TCP and UDP sockets, a multicast discovery socket, an admin socket, router,
 // switch and DHT node. A config.NodeState is returned which contains both the
@@ -159,7 +159,7 @@ func (c *Core) _start(nc *config.NodeConfig, log *log.Logger) error {
 	return nil
 }
 
-// Stop shuts down the Yggdrasil node.
+// Stop shuts down the Mesh node.
 func (c *Core) Stop() {
 	phony.Block(c, func() {
 		c.log.Infoln("Stopping...")

src/core/core_test.go

@@ -10,8 +10,8 @@ import (
 
 	"github.com/gologme/log"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/config"
-	"github.com/yggdrasil-network/yggdrasil-go/src/defaults"
+	"github.com/RiV-chain/RiV-mesh/src/config"
+	"github.com/RiV-chain/RiV-mesh/src/defaults"
 )
 
 // GenerateConfig produces default configuration with suitable modifications for tests.

src/core/link.go

@@ -14,8 +14,8 @@ import (
 	//"sync/atomic"
 	"time"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	"github.com/yggdrasil-network/yggdrasil-go/src/util"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/util"
 	"golang.org/x/net/proxy"
 	//"github.com/Arceliar/phony" // TODO? use instead of mutexes
 )

src/core/nodeinfo.go

@@ -12,9 +12,9 @@ import (
 	iwt "github.com/Arceliar/ironwood/types"
 	"github.com/Arceliar/phony"
 
-	//"github.com/yggdrasil-network/yggdrasil-go/src/crypto"
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	"github.com/yggdrasil-network/yggdrasil-go/src/version"
+	//"github.com/RiV-chain/RiV-mesh/src/crypto"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/version"
 )
 
 // NodeInfoPayload represents a RequestNodeInfo response, in bytes.

src/core/proto.go

@@ -12,7 +12,7 @@ import (
 	iwt "github.com/Arceliar/ironwood/types"
 	"github.com/Arceliar/phony"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/address"
 )
 
 const (

src/core/tcp.go

@@ -26,8 +26,8 @@ import (
 
 	"golang.org/x/net/proxy"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	//"github.com/yggdrasil-network/yggdrasil-go/src/util"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	//"github.com/RiV-chain/RiV-mesh/src/util"
 )
 
 const default_timeout = 6 * time.Second

src/core/version.go

@@ -20,7 +20,7 @@ type version_metadata struct {
 // Gets a base metadata with no keys set, but with the correct version numbers.
 func version_getBaseMetadata() version_metadata {
 	return version_metadata{
-		meta:     [4]byte{'m', 'e', 't', 'a'},
+		meta:     [4]byte{'z', 'e', 't', 'a'},
 		ver:      0,
 		minorVer: 4,
 	}

src/defaults/defaults.go

@@ -1,6 +1,6 @@
 package defaults
 
-import "github.com/yggdrasil-network/yggdrasil-go/src/config"
+import "github.com/RiV-chain/RiV-mesh/src/config"
 
 type MulticastInterfaceConfig = config.MulticastInterfaceConfig
 
@@ -11,7 +11,7 @@ type platformDefaultParameters struct {
 	// Admin socket
 	DefaultAdminListen string
 
-	// Configuration (used for yggdrasilctl)
+	// Configuration (used for meshctl)
 	DefaultConfigFile string
 
 	// Multicast interfaces

src/defaults/defaults_darwin.go

@@ -7,10 +7,10 @@ package defaults
 func GetDefaults() platformDefaultParameters {
 	return platformDefaultParameters{
 		// Admin
-		DefaultAdminListen: "unix:///var/run/yggdrasil.sock",
+		DefaultAdminListen: "unix:///var/run/mesh.sock",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "/etc/yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "/etc/mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{

src/defaults/defaults_freebsd.go

@@ -7,10 +7,10 @@ package defaults
 func GetDefaults() platformDefaultParameters {
 	return platformDefaultParameters{
 		// Admin
-		DefaultAdminListen: "unix:///var/run/yggdrasil.sock",
+		DefaultAdminListen: "unix:///var/run/mesh.sock",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "/usr/local/etc/yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "/usr/local/etc/mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{

src/defaults/defaults_linux.go

@@ -7,10 +7,10 @@ package defaults
 func GetDefaults() platformDefaultParameters {
 	return platformDefaultParameters{
 		// Admin
-		DefaultAdminListen: "unix:///var/run/yggdrasil.sock",
+		DefaultAdminListen: "unix:///var/run/mesh.sock",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "/etc/yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "/etc/mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{

src/defaults/defaults_openbsd.go

@@ -7,10 +7,10 @@ package defaults
 func GetDefaults() platformDefaultParameters {
 	return platformDefaultParameters{
 		// Admin
-		DefaultAdminListen: "unix:///var/run/yggdrasil.sock",
+		DefaultAdminListen: "unix:///var/run/mesh.sock",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "/etc/yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "/etc/mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{

src/defaults/defaults_other.go

@@ -9,8 +9,8 @@ func GetDefaults() platformDefaultParameters {
 		// Admin
 		DefaultAdminListen: "tcp://localhost:9001",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "/etc/yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "/etc/mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{

src/defaults/defaults_windows.go

@@ -9,8 +9,8 @@ func GetDefaults() platformDefaultParameters {
 		// Admin
 		DefaultAdminListen: "tcp://localhost:9001",
 
-		// Configuration (used for yggdrasilctl)
-		DefaultConfigFile: "C:\\Program Files\\Yggdrasil\\yggdrasil.conf",
+		// Configuration (used for meshctl)
+		DefaultConfigFile: "C:\\Program Files\\Mesh\\mesh.conf",
 
 		// Multicast interfaces
 		DefaultMulticastInterfaces: []MulticastInterfaceConfig{
@@ -20,6 +20,6 @@ func GetDefaults() platformDefaultParameters {
 		// TUN/TAP
 		MaximumIfMTU:  65535,
 		DefaultIfMTU:  65535,
-		DefaultIfName: "Yggdrasil",
+		DefaultIfName: "Mesh",
 	}
 }

src/ipv6rwc/ipv6rwc.go

@@ -13,8 +13,8 @@ import (
 
 	iwt "github.com/Arceliar/ironwood/types"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	"github.com/yggdrasil-network/yggdrasil-go/src/core"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/core"
 )
 
 const keyStoreTimeout = 2 * time.Minute

src/multicast/admin.go

@@ -3,7 +3,7 @@ package multicast
 import (
 	"encoding/json"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/admin"
+	"github.com/RiV-chain/RiV-mesh/src/admin"
 )
 
 type GetMulticastInterfacesRequest struct{}

src/multicast/multicast.go

@@ -15,14 +15,14 @@ import (
 	"github.com/Arceliar/phony"
 	"github.com/gologme/log"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/config"
-	"github.com/yggdrasil-network/yggdrasil-go/src/core"
+	"github.com/RiV-chain/RiV-mesh/src/config"
+	"github.com/RiV-chain/RiV-mesh/src/core"
 	"golang.org/x/net/ipv6"
 )
 
 // Multicast represents the multicast advertisement and discovery mechanism used
-// by Yggdrasil to find peers on the same subnet. When a beacon is received on a
-// configured multicast interface, Yggdrasil will attempt to peer with that node
+// by Mesh to find peers on the same subnet. When a beacon is received on a
+// configured multicast interface, Mesh will attempt to peer with that node
 // automatically.
 type Multicast struct {
 	phony.Inbox

src/multicast/multicast_darwin.go

@@ -12,7 +12,7 @@ void StartAWDLBrowsing() {
 		serviceBrowser = [[NSNetServiceBrowser alloc] init];
 		serviceBrowser.includesPeerToPeer = YES;
 	}
-	[serviceBrowser searchForServicesOfType:@"_yggdrasil._tcp" inDomain:@""];
+	[serviceBrowser searchForServicesOfType:@"_mesh._tcp" inDomain:@""];
 }
 void StopAWDLBrowsing() {
 	if (serviceBrowser == nil) {

src/tuntap/admin.go

@@ -3,7 +3,7 @@ package tuntap
 import (
 	"encoding/json"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/admin"
+	"github.com/RiV-chain/RiV-mesh/src/admin"
 )
 
 type GetTUNRequest struct{}

src/tuntap/tun.go

@@ -19,18 +19,18 @@ import (
 	"github.com/gologme/log"
 	"golang.zx2c4.com/wireguard/tun"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/address"
-	"github.com/yggdrasil-network/yggdrasil-go/src/config"
-	"github.com/yggdrasil-network/yggdrasil-go/src/defaults"
-	"github.com/yggdrasil-network/yggdrasil-go/src/ipv6rwc"
+	"github.com/RiV-chain/RiV-mesh/src/address"
+	"github.com/RiV-chain/RiV-mesh/src/config"
+	"github.com/RiV-chain/RiV-mesh/src/defaults"
+	"github.com/RiV-chain/RiV-mesh/src/ipv6rwc"
 )
 
 type MTU uint16
 
 // TunAdapter represents a running TUN interface and extends the
-// yggdrasil.Adapter type. In order to use the TUN adapter with Yggdrasil, you
-// should pass this object to the yggdrasil.SetRouterAdapter() function before
-// calling yggdrasil.Start().
+// mesh.Adapter type. In order to use the TUN adapter with Mesh, you
+// should pass this object to the mesh.SetRouterAdapter() function before
+// calling mesh.Start().
 type TunAdapter struct {
 	rwc         *ipv6rwc.ReadWriteCloser
 	config      *config.NodeConfig
@@ -92,7 +92,7 @@ func MaximumMTU() uint64 {
 }
 
 // Init initialises the TUN module. You must have acquired a Listener from
-// the Yggdrasil core before this point and it must not be in use elsewhere.
+// the Mesh core before this point and it must not be in use elsewhere.
 func (tun *TunAdapter) Init(rwc *ipv6rwc.ReadWriteCloser, config *config.NodeConfig, log *log.Logger, options interface{}) error {
 	tun.rwc = rwc
 	tun.config = config

src/tuntap/tun_windows.go

@@ -8,7 +8,7 @@ import (
 	"log"
 	"net"
 
-	"github.com/yggdrasil-network/yggdrasil-go/src/defaults"
+	"github.com/RiV-chain/RiV-mesh/src/defaults"
 	"golang.org/x/sys/windows"
 
 	wgtun "golang.zx2c4.com/wireguard/tun"

src/util/util.go

@@ -1,4 +1,4 @@
-// Package util contains miscellaneous utilities used by yggdrasil.
+// Package util contains miscellaneous utilities used by mesh.
 // In particular, this includes a crypto worker pool, Cancellation machinery, and a sync.Pool used to reuse []byte.
 package util