p10k

.gitignore

@@ -1 +1,2 @@
 nvim/plugin/packer_compiled.lua
+zsh/powerlevel10k

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "zsh/p10k"]
-	path = zsh/p10k
-	url = https://gitrepo.ru/NeonXP/powerlevel10k.git

zsh/conf.d/p10k.zsh

@@ -0,0 +1,431 @@
+# Powerlevel10k configuration file restricted to 8-color ASCII. Produced by
+# running `p10k configure` while at 1387763f2719661dc7e43e86a5bfd24cc357d6a0
+# and then editing ~/.p10k.zsh. Configuration wizard header follows.
+#
+# Generated by Powerlevel10k configuration wizard on 2019-11-12 at 08:45 CET.
+# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 11792.
+# Wizard options: compatible, lean, 2 lines, disconnected, no frame, sparse, concise.
+# Type `p10k configure` to generate another config.
+
+# Temporarily change options.
+'builtin' 'local' '-a' 'p10k_config_opts'
+[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
+[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
+[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
+'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'
+
+() {
+  emulate -L zsh
+  setopt no_unset extended_glob
+  zmodload zsh/langinfo
+  if [[ ${langinfo[CODESET]:-} != (utf|UTF)(-|)8 ]]; then
+    local LC_ALL=${${(@M)$(locale -a):#*.(utf|UTF)(-|)8}[1]:-en_US.UTF-8}
+  fi
+
+  # Unset all configuration options. This allows you to apply configiguration changes without
+  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
+  unset -m 'POWERLEVEL9K_*'
+
+  # The list of segments shown on the left. Fill it with the most important segments.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
+      # =========================[ Line #1 ]=========================
+      dir                     # current directory
+      vcs                     # git status
+      # =========================[ Line #2 ]=========================
+      newline
+      prompt_char             # prompt symbol
+  )
+
+  # The list of segments shown on the right. Fill it with less important segments.
+  # Right prompt on the last prompt line (where you are typing your commands) gets
+  # automatically hidden when the input line reaches it. Right prompt above the
+  # last prompt line gets hidden if it would overlap with left prompt.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
+      # =========================[ Line #1 ]=========================
+      status                  # exit code of the last command
+      command_execution_time  # duration of the last command
+      background_jobs         # presence of background jobs
+      context                 # user@hostname
+      # =========================[ Line #2 ]=========================
+      newline
+  )
+
+  # Basic style options that define the overall look of your prompt. You probably don't want to
+  # change them.
+  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
+  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol
+
+  # When set to true, icons appear before content on both sides of the prompt. When set
+  # to false, icons go after content. If empty or not set, icons go before content in the left
+  # prompt and after content in the right prompt.
+  #
+  # You can also override it for a specific segment:
+  #
+  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
+  #
+  # Or for a specific segment in specific state:
+  #
+  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
+  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true
+
+  # Add an empty line before each prompt.
+  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
+
+  # Connect left prompt lines with these symbols.
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
+  # Connect right prompt lines with these symbols.
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=
+
+  # The left end of left prompt.
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
+  # The right end of right prompt.
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=
+
+  ################################[ prompt_char: prompt symbol ]################################
+  # Green prompt symbol if the last command succeeded.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2
+  # Red prompt symbol if the last command failed.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
+  # Default prompt symbol.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
+  # Prompt symbol in command vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
+  # Prompt symbol in visual vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
+  # Prompt symbol in overwrite vi mode.
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
+
+  ##################################[ dir: current directory ]##################################
+  # Default current directory color.
+  typeset -g POWERLEVEL9K_DIR_FOREGROUND=4
+  # If directory is too long, shorten some of its segments to the shortest possible unique
+  # prefix. The shortened directory can be tab-completed to the original.
+  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
+  # Replace removed segment suffixes with this symbol.
+  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
+  # Color of the shortened directory segments.
+  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4
+  # Color of the anchor directory segments. Anchor segments are never shortened. The first
+  # segment is always an anchor.
+  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4
+  # Display anchor directory segments in bold.
+  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
+  # Don't shorten directories that contain any of these files. They are anchors.
+  local anchor_files=(
+    .bzr
+    .citc
+    .git
+    .hg
+    .node-version
+    .python-version
+    .ruby-version
+    .shorten_folder_marker
+    .svn
+    .terraform
+    CVS
+    Cargo.toml
+    composer.json
+    go.mod
+    package.json
+  )
+  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
+  # Don't shorten this many last directory segments. They are anchors.
+  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
+  # Shorten directory if it's longer than this even if there is space for it. The value can
+  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
+  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
+  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
+  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
+  # many columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
+  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
+  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
+  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
+
+  # Enable special styling for non-writable directories.
+  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
+  # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
+  # above must be set to true for this parameter to have effect.
+  typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='X'
+
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '
+
+  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons for different directories.
+  # It must be an array with 3 * N elements. Each triplet consists of:
+  #
+  #   1. A pattern against which the current directory is matched. Matching is done with
+  #      extended_glob option enabled.
+  #   2. Directory class for the purpose of styling.
+  #   3. Icon.
+  #
+  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. If there
+  # are no matches, the directory will have no icon.
+  #
+  # Example:
+  #
+  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
+  #       '~/work(/*)#'  WORK     '(╯°□°）╯︵ ┻━┻'
+  #       '~(/*)#'       HOME     '⌂'
+  #       '*'            DEFAULT  '')
+  #
+  # With these settings, the current directory in the prompt may look like this:
+  #
+  #   (╯°□°）╯︵ ┻━┻ ~/work/projects/important/urgent
+  #
+  # Or like this:
+  #
+  #   ⌂ ~/best/powerlevel10k
+  #
+  # You can also set different colors for directories of different classes. Remember to override
+  # FOREGROUND, SHORTENED_FOREGROUND and ANCHOR_FOREGROUND for every directory class that you wish
+  # to have its own color.
+  #
+  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=31
+  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=103
+  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=39
+  #
+  typeset -g POWERLEVEL9K_DIR_CLASSES=()
+
+  #####################################[ vcs: git status ]######################################
+  # Branch icon.
+  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
+  POWERLEVEL9K_VCS_BRANCH_ICON=${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}
+
+  # Untracked files icon. It's really a question mark, your font isn't broken.
+  # Change the value of this parameter to show a different icon.
+  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
+  POWERLEVEL9K_VCS_UNTRACKED_ICON=${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}
+
+  # Formatter for Git status.
+  #
+  # Example output: master <42 >42 *42 merge ~42 +42 !42 ?42.
+  #
+  # You can edit the function to customize how Git status looks.
+  #
+  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
+  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
+  function my_git_formatter() {
+    emulate -L zsh
+
+    if [[ -n $P9K_CONTENT ]]; then
+      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
+      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
+      typeset -g my_git_format=$P9K_CONTENT
+      return
+    fi
+
+    if (( $1 )); then
+      # Styling for up-to-date Git status.
+      local       meta='%f'   # default foreground
+      local      clean='%2F'  # green foreground
+      local   modified='%3F'  # yellow foreground
+      local  untracked='%4F'  # blue foreground
+      local conflicted='%1F'  # red foreground
+    else
+      # Styling for incomplete and stale Git status.
+      local       meta='%5F'  # magenta foreground
+      local      clean='%5F'  # magenta foreground
+      local   modified='%5F'  # magenta foreground
+      local  untracked='%5F'  # magenta foreground
+      local conflicted='%5F'  # magenta foreground
+    fi
+
+    local res
+    local where  # branch name, tag or commit
+    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
+      res+="${clean}${POWERLEVEL9K_VCS_BRANCH_ICON}"
+      where=${(V)VCS_STATUS_LOCAL_BRANCH}
+    elif [[ -n $VCS_STATUS_TAG ]]; then
+      res+="${meta}#"
+      where=${(V)VCS_STATUS_TAG}
+    else
+      res+="${meta}@"
+      where=${VCS_STATUS_COMMIT[1,8]}
+    fi
+
+    # If local branch name or tag is at most 32 characters long, show it in full.
+    # Otherwise show the first 12 … the last 12.
+    (( $#where > 32 )) && where[13,-13]="…"
+    res+="${clean}${where//\%/%%}"  # escape %
+
+    # Show tracking branch name if it differs from local branch.
+    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
+      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"  # escape %
+    fi
+
+    # <42 if behind the remote.
+    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
+    # >42 if ahead of the remote.
+    (( VCS_STATUS_COMMITS_AHEAD  )) && res+=" ${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
+    # *42 if have stashes.
+    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
+    # 'merge' if the repo is in an unusual state.
+    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
+    # ~42 if have merge conflicts.
+    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
+    # +42 if have staged changes.
+    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
+    # !42 if have unstaged changes.
+    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
+    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
+    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
+    # Remove the next line if you don't want to see untracked files at all.
+    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
+
+    typeset -g my_git_format=$res
+  }
+  functions -M my_git_formatter 2>/dev/null
+
+  # Disable the default Git status formatting.
+  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
+  # Install our own Git status formatter.
+  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
+  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
+  # Enable counters for staged, unstaged, etc.
+  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1
+
+  # Icon color.
+  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2
+  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=5
+  # Custom icon.
+  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '
+
+  # Show status of repositories of these types. You can add svn and/or hg if you are
+  # using them. If you do, your prompt may become slow even when your current directory
+  # isn't in an svn or hg reposotiry.
+  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)
+
+  # These settings are used for respositories other than Git or when gitstatusd fails and
+  # Powerlevel10k has to fall back to using vcs_info.
+  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2
+  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2
+  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3
+  typeset -g POWERLEVEL9K_VCS_UNSTAGED_ICON='!'
+  typeset -g POWERLEVEL9K_VCS_STAGED_ICON='+'
+  typeset -g POWERLEVEL9K_VCS_STASH_ICON='*'
+  typeset -g POWERLEVEL9K_VCS_INCOMING_CHANGES_ICON='<'
+  typeset -g POWERLEVEL9K_VCS_OUTGOING_CHANGES_ICON='>'
+  typeset -g POWERLEVEL9K_VCS_TAG_ICON='#'
+  typeset -g POWERLEVEL9K_VCS_COMMIT_ICON='@'
+  typeset -g POWERLEVEL9K_VCS_REMOTE_BRANCH_ICON=':'
+
+  ##########################[ status: exit code of the last command ]###########################
+  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
+  # style them independently from the regular OK and ERROR state.
+  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true
+
+  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
+  # it will signify success by turning green.
+  typeset -g POWERLEVEL9K_STATUS_OK=false
+  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
+  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION=''
+
+  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
+  # like this: 1|0.
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION=''
+
+  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
+  # it will signify error by turning red.
+  typeset -g POWERLEVEL9K_STATUS_ERROR=false
+  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION=''
+
+  # Status when the last command was terminated by a signal.
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1
+  # Use terse signal names: "INT" instead of "SIGINT(2)".
+  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=''
+
+  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
+  # It may look like this: 1|0.
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION=''
+
+  ###################[ command_execution_time: duration of the last command ]###################
+  # Show duration of the last command if takes longer than this many seconds.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
+  # Show this many fractional digits. Zero means round to seconds.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
+  # Execution time color.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3
+  # Duration format: 1d 2h 3m 4s.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
+  # Custom icon.
+  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '
+
+  #######################[ background_jobs: presence of background jobs ]#######################
+  # Don't show the number of background jobs.
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
+  # Background jobs color.
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=2
+  # Icon to show when there are background jobs.
+  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='bg'
+
+  ##################################[ context: user@hostname ]##################################
+  # Default context color.
+  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=2
+  # Default context format: %n is username, %m is hostname.
+  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'
+
+  # Context color when running with privileges.
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
+  # Context format when running with privileges: bold user@hostname.
+  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'
+
+  # Don't show context unless running with privileges or in SSH.
+  # Tip: Remove the next line to always show context.
+  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
+
+  # Custom icon.
+  # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
+  # Custom prefix.
+  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith '
+
+  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
+  # when accepting a command line. Supported values:
+  #
+  #   - off:      Don't change prompt when accepting a command line.
+  #   - always:   Trim down prompt when accepting a command line.
+  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
+  #               typed after changing current working directory.
+  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always
+
+  # Instant prompt mode.
+  #
+  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
+  #              it incompatible with your zsh configuration files.
+  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
+  #              during zsh initialization. Choose this if you've read and understood
+  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
+  #   - verbose: Enable instant prompt and print a warning when detecting console output during
+  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
+  #              seen the warning, or if you are unsure what this all means.
+  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose
+
+  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
+  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
+  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
+  # really need it.
+  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
+}
+
+(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
+'builtin' 'unset' 'p10k_config_opts'

zsh/powerlevel10k

@@ -0,0 +1 @@
+Subproject commit 2b7da93df04acd04d84f5de827e5b14077839a4b

zsh/zshrc

@@ -1,23 +1,18 @@
-# Use powerline
-USE_POWERLINE="true"
-# Has weird character width
-# Example:
-#    is not a diamond
-HAS_WIDECHARS="false"
-# Source manjaro-zsh-configuration
-if [[ -e /usr/share/zsh/manjaro-zsh-config ]]; then
-  source /usr/share/zsh/manjaro-zsh-config
-fi
-# Use manjaro zsh prompt
-if [[ -e /usr/share/zsh/manjaro-zsh-prompt ]]; then
-  source /usr/share/zsh/manjaro-zsh-prompt
-fi
-
 source ~/.config/zsh/antigen.zsh
 if [[ ! -a  ~/.zshrc.local ]]; then
   source ~/.zshrc.local
 fi
 
+if command -v git >/dev/null && [ ! -d ~/.config/zsh/powerlevel10k ]; then
+  echo "info: installing p10k"
+  git clone --depth 1 --single-branch https://github.com/romkatv/powerlevel10k.git ~/.config/zsh/powerlevel10k
+fi
+
+
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
 antigen bundle zsh-users/zsh-syntax-highlighting
 antigen bundle zsh-users/zsh-history-substring-search
 antigen bundle zsh-users/zsh-autosuggestions
@@ -34,9 +29,15 @@ export GOPROXY=https://proxy.neonxp.ru
 export EDITOR="nvim"
 #export DOCKER_HOST=unix://$XDG_RUNTIME_DIR/docker.sock
 
+export LS_OPTIONS='--color=auto'
+eval "$(dircolors -b)"
+
 # Aliases
-alias ls="ls -F"
+alias ls='ls $LS_OPTIONS -F'
-alias l="ls"
+alias l='ls $LS_OPTIONS -F'
+alias j="sudo journalctl"
+alias s='sudo'
+alias sctl="sudo systemctl"
 alias ll="ls -AFhl"
 alias cp="cp -i"                                                # Confirm before overwriting something
 alias gitpush="git add . && git commit --amend --no-edit && git push -f"
@@ -49,6 +50,8 @@ alias df="df -h"                          # human-readable sizes
 alias free="free -m"                      # show sizes in MB
 alias np="nano -w PKGBUILD"
 alias more=less
+alias gitu='git add . && git commit && git push'
+alias g=git
 
 
 [[ ! -f `which exa` ]] || alias ls="exa" && alias ll="exa -l"
@@ -74,13 +77,14 @@ setopt autocd                                                   # if only direct
 setopt inc_append_history                                       # save commands are added to the history immediately, otherwise only when shell exits.
 setopt histignorespace                                          # Don"t save commands that start with space
 
-zstyle ":completion:*" matcher-list "m:{a-zA-Z}={A-Za-z}"       # Case insensitive tab completion
+zstyle ':completion:*' matcher-list 'm:{[:lower:][:upper:]}={[:upper:][:lower:]}' # Case insensitive tab completion
-zstyle ":completion:*" list-colors "${(s.:.)LS_COLORS}"         # Colored completion (different colors for dirs/files/etc)
+zstyle ':completion:*' list-colors "${(s.:.)LS_COLORS}"         # Colored completion (different colors for dirs/files/etc)
-zstyle ":completion:*" rehash true                              # automatically find new executables in path
+zstyle ':completion:*' rehash true                              # automatically find new executables in path
+zstyle ':completion:*' menu select                              # Highlight menu selection
 # Speed up completions
-zstyle ":completion:*" accept-exact "*(N)"
+zstyle ':completion:*' accept-exact '*(N)'
-zstyle ":completion:*" use-cache on
+zstyle ':completion:*' use-cache on
-zstyle ":completion:*" cache-path ~/.zsh/cache
+zstyle ':completion:*' cache-path ~/.zsh/cache
 
 zstyle ":completion:*:processes" command "ps -ax"
 zstyle ":completion:*:*:kill:*:processes" list-colors "=(#b) #([0-9]#)*=0=01;32"
@@ -96,9 +100,19 @@ HISTSIZE=100000
 SAVEHIST=100000
 WORDCHARS=${WORDCHARS//\/[&.;]}
 
+
 autoload -U compinit colors zcalc
 compinit -d
 
+
+autoload -U add-zsh-hook
+add-zsh-hook precmd mzc_termsupport_precmd
+add-zsh-hook preexec mzc_termsupport_preexec
+# Use a precmd hook instead of a chpwd hook to avoid contaminating output
+# i.e. when a script or function changes directory without `cd -q`, chpwd
+# will be called the output may be swallowed by the script or function.
+add-zsh-hook precmd mzc_termsupport_cwd
+
 source ~/.config/zsh/conf.d/*.zsh
 
 colors
@@ -154,3 +168,193 @@ bindkey "^[[Z" undo                                             # Shift+tab undo
 
 # ctrl + space accept suggestion
 bindkey "^ " autosuggest-accept
+
+# Set terminal window and tab/icon title
+#
+# usage: title short_tab_title [long_window_title]
+#
+# See: http://www.faqs.org/docs/Linux-mini/Xterm-Title.html#ss3.1
+# Fully supports screen and probably most modern xterm and rxvt
+# (In screen, only short_tab_title is used)
+function title {
+  emulate -L zsh
+  setopt prompt_subst
+
+  [[ "$EMACS" == *term* ]] && return
+
+  # if $2 is unset use $1 as default
+  # if it is set and empty, leave it as is
+  : ${2=$1}
+
+  case "$TERM" in
+    xterm*|putty*|rxvt*|konsole*|ansi|mlterm*|alacritty|kitty|wezterm|st*)
+      print -Pn "\e]2;${2:q}\a" # set window name
+      print -Pn "\e]1;${1:q}\a" # set tab name
+      ;;
+    screen*|tmux*)
+      print -Pn "\ek${1:q}\e\\" # set screen hardstatus
+      ;;
+    *)
+    # Try to use terminfo to set the title
+    # If the feature is available set title
+    if [[ -n "$terminfo[fsl]" ]] && [[ -n "$terminfo[tsl]" ]]; then
+      echoti tsl
+      print -Pn "$1"
+      echoti fsl
+    fi
+      ;;
+  esac
+}
+
+ZSH_THEME_TERM_TAB_TITLE_IDLE="%15<..<%~%<<" #15 char left truncated PWD
+ZSH_THEME_TERM_TITLE_IDLE="%n@%m:%~"
+
+# Runs before showing the prompt
+function mzc_termsupport_precmd {
+  [[ "${DISABLE_AUTO_TITLE:-}" == true ]] && return
+  title $ZSH_THEME_TERM_TAB_TITLE_IDLE $ZSH_THEME_TERM_TITLE_IDLE
+}
+
+# Runs before executing the command
+function mzc_termsupport_preexec {
+  [[ "${DISABLE_AUTO_TITLE:-}" == true ]] && return
+
+  emulate -L zsh
+
+  # split command into array of arguments
+  local -a cmdargs
+  cmdargs=("${(z)2}")
+  # if running fg, extract the command from the job description
+  if [[ "${cmdargs[1]}" = fg ]]; then
+    # get the job id from the first argument passed to the fg command
+    local job_id jobspec="${cmdargs[2]#%}"
+    # logic based on jobs arguments:
+    # http://zsh.sourceforge.net/Doc/Release/Jobs-_0026-Signals.html#Jobs
+    # https://www.zsh.org/mla/users/2007/msg00704.html
+    case "$jobspec" in
+      <->) # %number argument:
+        # use the same <number> passed as an argument
+        job_id=${jobspec} ;;
+      ""|%|+) # empty, %% or %+ argument:
+        # use the current job, which appears with a + in $jobstates:
+        # suspended:+:5071=suspended (tty output)
+        job_id=${(k)jobstates[(r)*:+:*]} ;;
+      -) # %- argument:
+        # use the previous job, which appears with a - in $jobstates:
+        # suspended:-:6493=suspended (signal)
+        job_id=${(k)jobstates[(r)*:-:*]} ;;
+      [?]*) # %?string argument:
+        # use $jobtexts to match for a job whose command *contains* <string>
+        job_id=${(k)jobtexts[(r)*${(Q)jobspec}*]} ;;
+      *) # %string argument:
+        # use $jobtexts to match for a job whose command *starts with* <string>
+        job_id=${(k)jobtexts[(r)${(Q)jobspec}*]} ;;
+    esac
+
+    # override preexec function arguments with job command
+    if [[ -n "${jobtexts[$job_id]}" ]]; then
+      1="${jobtexts[$job_id]}"
+      2="${jobtexts[$job_id]}"
+    fi
+  fi
+
+  # cmd name only, or if this is sudo or ssh, the next cmd
+  local CMD=${1[(wr)^(*=*|sudo|ssh|mosh|rake|-*)]:gs/%/%%}
+  local LINE="${2:gs/%/%%}"
+
+  title '$CMD' '%100>...>$LINE%<<'
+}
+
+# URL-encode a string
+#
+# Encodes a string using RFC 2396 URL-encoding (%-escaped).
+# See: https://www.ietf.org/rfc/rfc2396.txt
+#
+# By default, reserved characters and unreserved "mark" characters are
+# not escaped by this function. This allows the common usage of passing
+# an entire URL in, and encoding just special characters in it, with
+# the expectation that reserved and mark characters are used appropriately.
+# The -r and -m options turn on escaping of the reserved and mark characters,
+# respectively, which allows arbitrary strings to be fully escaped for
+# embedding inside URLs, where reserved characters might be misinterpreted.
+#
+# Prints the encoded string on stdout.
+# Returns nonzero if encoding failed.
+#
+# Usage:
+#  zsh_urlencode [-r] [-m] [-P] <string> [<string> ...]
+#
+#    -r causes reserved characters (;/?:@&=+$,) to be escaped
+#
+#    -m causes "mark" characters (_.!~*''()-) to be escaped
+#
+#    -P causes spaces to be encoded as '%20' instead of '+'
+function zsh_urlencode() {
+  emulate -L zsh
+  local -a opts
+  zparseopts -D -E -a opts r m P
+
+  local in_str="$@"
+  local url_str=""
+  local spaces_as_plus
+  if [[ -z $opts[(r)-P] ]]; then spaces_as_plus=1; fi
+  local str="$in_str"
+
+  # URLs must use UTF-8 encoding; convert str to UTF-8 if required
+  local encoding=$langinfo[CODESET]
+
+
+  # Use LC_CTYPE=C to process text byte-by-byte
+  local i byte ord LC_ALL=C
+  export LC_ALL
+  local reserved=';/?:@&=+$,'
+  local mark='_.!~*''()-'
+  local dont_escape="[A-Za-z0-9"
+  if [[ -z $opts[(r)-r] ]]; then
+    dont_escape+=$reserved
+  fi
+  # $mark must be last because of the "-"
+  if [[ -z $opts[(r)-m] ]]; then
+    dont_escape+=$mark
+  fi
+  dont_escape+="]"
+
+  # Implemented to use a single printf call and avoid subshells in the loop,
+  # for performance
+  local url_str=""
+  for (( i = 1; i <= ${#str}; ++i )); do
+    byte="$str[i]"
+    if [[ "$byte" =~ "$dont_escape" ]]; then
+      url_str+="$byte"
+    else
+      if [[ "$byte" == " " && -n $spaces_as_plus ]]; then
+        url_str+="+"
+      else
+        ord=$(( [##16] #byte ))
+        url_str+="%$ord"
+      fi
+    fi
+  done
+  echo -E "$url_str"
+}
+
+# Emits the control sequence to notify many terminal emulators
+# of the cwd
+#
+# Identifies the directory using a file: URI scheme, including
+# the host name to disambiguate local vs. remote paths.
+function mzc_termsupport_cwd {
+  # Percent-encode the host and path names.
+  local URL_HOST URL_PATH
+  URL_HOST="$(zsh_urlencode -P $HOST)" || return 1
+  URL_PATH="$(zsh_urlencode -P $PWD)" || return 1
+
+  # common control sequence (OSC 7) to set current host and path
+  printf "\e]7;%s\a" "file://${URL_HOST}${URL_PATH}"
+}
+
+if [ -f env.sh ]; then
+  source ./env.sh
+fi
+
+[[ ! -f ~/.config/zsh/p10k.zsh ]] || source ~/.config/zsh/p10k.zsh