Adding InitRuntimeFiles() to buffer_test.go has changed the behavior
of this test: now it tests not just buffer editing per se, but also
how well buffer editing works together with syntax highlighting (since
InitRuntimeFiles() loads syntax files, and many of the test buffers
match the json header pattern in the json.yaml syntax file, so they are
"highlighted" as json). This revealed long existing races between
buffer editing and syntax highlighting.
Until we fix those races, temporarily disable InitRuntimeFiles() in this
test.
When initializing runtime files (syntax files etc) in tests, initialize
built-in runtime files only, to ensure that the tests are not affected
by whatever is in ~/.config/micro/ on the test machine.
micro_test.go already ensures that, by using its own temporary directory
as an (empty) config directory. So we only need to fix buffer_test.go
and rtfiles_test.go. In those tests, don't repeat the same dance with
a temporary directory, instead just ignore the config directory.
Adding InitPlugins() to tests has caused noisy error logs when running
the buffer_test.go test (although the test result is still PASS):
2024/03/23 15:14:30 Plugin does not exist: autoclose at autoclose : &{autoclose autoclose <nil> [runtime/plugins/autoclose/autoclose.lua] false true}
2024/03/23 15:14:30 Plugin does not exist: comment at comment : &{comment comment <nil> [runtime/plugins/comment/comment.lua] false true}
2024/03/23 15:14:30 Plugin does not exist: diff at diff : &{diff diff <nil> [runtime/plugins/diff/diff.lua] false true}
2024/03/23 15:14:30 Plugin does not exist: ftoptions at ftoptions : &{ftoptions ftoptions <nil> [runtime/plugins/ftoptions/ftoptions.lua] false true}
...
These errors are caused simply by the fact that plugins are initialized
but not loaded. Adding config.LoadAllPlugins() to buffer_test.go "fixes"
this problem.
However, at the moment it doesn't seem a good idea to load plugins in
buffer_test.go, since buffer_test.go doesn't properly initialize Lua. It
only does ulua.L = lua.NewState() but doesn't do the other stuff that
init() in cmd/micro/initlua.go does. As a result, plugins will not be
able to do anything correctly.
So in order to initialize Lua correctly we need to be inside cmd/micro/,
so we cannot do it in buffer_test.go or any other tests except
micro_test.go.
* rtfiles: Initialize all-/realFiles and Plugins in InitRuntimeFiles
* command: Reload plugins at ReloadCmd too
* command: Don't reload plugins in case of ReloadConfig()
* rtfiles: Split InitRuntimeFiles() into one func for assets and one for plugins
* rtfiles: Remove the unnecessary init function
With this modification the InitRuntimeFiles() and InitPlugins() (if needed)
must be called first, otherwise uninitialized runtime file variables are most
likely.
* settings: Move all options to the start of the file
This will help with the overview of all available options and their optional
validators.
* settings: Add generic string option validator
* settings: Autocomplete string options
Passing options via micro -option=value in the command line should only
temporarily override the option value for the current micro session,
not change it permanently in settings.json. But currently it wrongly
writes it to settings.json in the case when the value passed via command
line is the default value of this option, while the current permanent
setting in settings.json is a non-default value.
Fixes#3005
Added option `hltrailingws` for highlighting trailing whitespaces
at the end of lines. Note that it behaves in a "smart" way.
It doesn't highlight newly added (transient) trailing whitespaces
that naturally occur while typing text. It would be annoying to
see transient highlighting every time we enter a space at the end
of a line while typing.
So a newly added trailing whitespace starts being highlighting
only after the cursor moves to another line. Thus the highlighting
serves its purpose: it draws our attention to annoying sloppy
forgotten trailing whitespaces.
Added option `hltaberrors` which helps to spot sloppy whitespace errors
with tabs used instead of spaces or vice versa.
It uses the value of `tabstospaces` option as a criterion whether a
tab or space character is an error or not.
If `tabstospaces` is on, we probably expect that the file should contain
no tab characters, so any tab character is highlighted as an error.
If `tabstospaces` is off, we probably expect that the file uses
indentation with tabs, so space characters in the initial indent part
of lines are highlighted as errors.
* Update docs to include `matchbracestyle`
* Add `matchbracestyle` to infocomplete.go
* Add validator and default settings for `matchbracestyle`
* Highlight or underline braces based on `matchbracestyle`
* Add `match-brace` to default colorschemes
* Correct `FindMatchingBrace()` counting
Make brace under the cursor have priority over brace to the left in
ambiguous cases when matching braces
Co-authored-by: Dmitry Maluka <dmitrymaluka@gmail.com>
* Fix conflicts
---------
Co-authored-by: Jöran Karl <3951388+JoeKar@users.noreply.github.com>
Co-authored-by: Dmitry Maluka <dmitrymaluka@gmail.com>
If ~/.config/micro/plug directory contains a plugin with the same name
as a built-in plugin, the expected behavior is that the user-defined
plugin in ~/.config/micro/plug is loaded instead of the built-in one.
Whereas the existing behavior is that the built-in plugin is used
instead of the user-defined one. Even worse, it is buggy: in this case
the plugin is registered twice, so its callbacks are executed twice
(e.g. with the autoclose plugin, a bracket is autoclosed with two
closing brackets instead of one).
Fix this by ensuring that if a plugin with the same name exists in the
~/.config/micro/plug directory, the built-in one is ignored.
Fixes#3029
It doesn't seem necessary to write settings to settings.json when
registering a new option. The option is set to its default value, which
means that it will not be written to settings.json (precisely because
it's the default value), so the contents of settings.json don't change
and thus don't need to be written again.
This unneeded writing, in particular, causes unexpected "The file on
disk has changed. Reload file? (y,n,esc)" each time when we open
settings.json via micro.
Fixes#2647
Avoid code duplication between RegisterCommonOption() and
RegisterCommonOptionPlug(), exactly the same way as it is done for
RegisterGlobalOption() and RegisterGlobalOptionPlug().
* Add reload setting
Can be set to:
* auto - Automatically reload files that changed
* disabled - Do not reload files
* prompt - Prompt the user about reloading the file.
* option: Add default value for reload option and documentation
---------
Co-authored-by: Wilberto Morales <wilbertomorales777@gmail.com>
Adds config option `multimode`, which takes values `tab`, `vsplit`,
or `hsplit` (corresponding to the file-opening commands). I mean to
use it with a command line like
micro -multimode vsplit foo.h foo.c
to open files in a side-by-side split, but if one really wanted to
one could set it in the config file to change the default behavior of
opening multiple files in tabs.
Fix issue where symlinked plugin directories were ignored. For example
$ file ~/.config/micro/plug/example
example: symbolic link to <target directory>
This allows plugins to be managed in a user's "dotfiles" repository, and
be symlinked into micro's plugin directory.
After 9ad4437, directly specifying color names (instead of syntax groups)
in syntax files no longer works. In particular *.patch and *.diff files
are not highlighted, since in patch.yaml direct colors names are used.
Restore the previous behavior of GetColor (fallback to direct colors if
no syntax group found) to fix this regression, but also make some changes
in StringToStyle and StringToColor to still fix the issue which was fixed
by 9ad4437. In other words, ensure that there is no confusion between
direct colors ("red", "green" etc) and syntax groups omitted in the
colorscheme file.
* Support for highlighting all search matches (hlsearch)
hlsearch is implemented efficiently using the buffer's line array,
somewhat similarly to the syntax highlighting.
Unlike the syntax highlighter which highlights the entire file,
hlsearch searches for matches for the displayed lines only.
Matches are searched when the given line is displayed first time
or after it was modified. Otherwise the previously found matches
are used.
* Add UnhighlightSearch action
and add it to the list of actions triggered by Esc key by default.
* Add comment explaining the purpose of search map
* Add hlsearch colors to colorschemes
Mostly just copied from the corresponding original (mostly vim) colorschemes.
* Highlight matches during/after replace as well
As a side effect it also changes the last search value, i.e. affects FindNext
and FindPrevious, but it's probably fine. In vim it works the same way.
* Improve hlsearch option description
* Fix default colors for unconfigured syntax groups
When GetColor is called for a syntax group not specified in the
colorscheme, it should fallback not to the terminal's default colors
(tcell.DefaultColor) but to the colorscheme's defaults (DefStyle)
which may be different from tcell.DefaultColor.
For example, if we are using micro's default colorscheme in a terminal
which uses a black-on-white theme, then dots and commas in Go files
("symbol" syntax group in go.yaml) are displayed black on a dark
background, i.e. barely visible.
* Avoid using terminal's default colors directly
If a syntax group color is set to "default" (which we have for some
syntax groups in some colorschemes), it defaults to the terminal's
default colors (tcell.DefaultColor), which is fine for 16-color
colorschemes but not quite fine for truecolor and 256-color
colorschemes which should not depend on the terminal colors.
It should default to the colorscheme's default (DefStyle) instead.
For example, if we are using micro's default colorscheme in a terminal
which uses a black-on-white theme, then "bool" type in C files
("type.extended" syntax group in c.yaml) is displayed black on a dark
background, i.e. barely visible.
Make the regular expression much more precise:
* match literal dots instead of any char (match rc.conf but not rcXconf)
* match special filenames exactly (match PKGBUILD but not myPKGBUILD.something)
Run build-all to update internal/config/runtime.go
closes#2163
* shellcheck as a new shell linter + runtime.go out of git control
* keep runtime.go and keep both shfmt and shellcheck since we can remove from custom conf